[amayausers.com] Re: Polypropylene...any tips!
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 16 Sep 2008 15:57:06 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/694.html#000003
April,
Consider using a smaller needle, such as the 65/9 ball point and increase your
density values. You may have to experiment with your density values until you
get something that still had adequate coverage but doesn't put the needle
penetrations so close together. Also be sure you aren't using too much
underlayment stitches as well. You guessed it,... more needle penetrations.
Ed Orantes
Melco Tech & Trainer
504-258-6260
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
