[amayausers.com] Re: PCB help!!
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 20 Sep 2010 15:51:51 UT
This message was posted by EEAmayaTech on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1021.html#000006
Hi Brian, the color thread feed motor is a stepper motor. I believe there
might should be 2 LEDS that represent the states in Binary (Red and Green) ( I
know that is the case with the color change). Laser Up arrow will give you a
thread feed advance of I believe 91mm? But either way you should see the LEDS
flash through all 4 or 8 states (if off is a state, I can't remember). But look
at the color change for reference.
Todd J.
586-909-3913
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
