Hello, materialendings has just posted in the Machines & Hardware forum of AmayaUsers Discussion Boards under the title of Not stiching. This thread is located at http://www.amayausers.com/discussion/showthread.php?5577-Not-stiching Here is the message that has just been posted: *************** ---Quote (Originally by Mama Kass)--- Do you use spray adhesive? If so, build-up in the bobbin area can cause this very problem. Doing a hook wash with WD40 may help. I take off the cover plate, remove the bobbin case, spray the hook basket area with plenty of WD40, cover the whole area with a plastic bag (this keeps the WD40 from splattering out in all directions), and then with an unthreaded needle stitch right through the bag at maximum speed for a few minutes. When you're done, wipe everything down and oil the knife and hook as directed by the manual. ---End Quote--- Well I have read all you very good suggestions and we have taken all those steps. We have even talked over the phone to Greenwing and have gone step by step. And to Mama Kass,that tip is one very good one. But I used that spray and even the sticky stabilizer never again, I use glue stick only in the non sewing area works great that is my tip. Now I guess it is time to shell out some money to get a tech. Next step to post for a tech in the Las Vegas area. Thank you to all with you help. Johanna *************** =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================