[amayausers.com] New Post/Thread Notification: Machines & Hardware
- From: "AmayaUsers Discussion Boards" <theboards@xxxxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 03 Sep 2014 15:05:42 +0000
Hello,
Rod or Sharon has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of New Amaya XTS.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?5877-New-Amaya-XTS
Here is the message that has just been posted:
***************
One of the most important differences to note is the change in the "cap
driver". It is very different than the XT. It is also Red in color. Because of
the difference in the Y-offset in the older and new driver, the hoop lists have
been changed in AOS. Now, when using a hoop with a wide angle driver, you will
notice the color of the driver precedes the hoop in the selection drop-down.
For example, you might see “Red XTS WACF” or “Graphite XTS WACF”. The
appropriate driver/hoop combination must be selected.
If these cap drivers do not show up in your hoop list, you need to give Melco a
call and they will talk you through the process so that they can be selected.
Rod Springer
Amaya Tech & Trainer
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
