Hello, Bill Griffin has just posted in the Machines & Hardware forum of AmayaUsers Discussion Boards under the title of Machine won't fully come on. This thread is located at http://www.amayausers.com/discussion/showthread.php?5734-Machine-won-t-fully-come-on Here is the message that has just been posted: *************** In mid January my Amaya XT would not come on. However, if we turned it on and left it for a good while (maybe 30 minutes or so), it would eventually come on. Technician came, there were some other problems, but the diagnosis was that the cause for the machine not coming on immediately was need for a new control board. One was ordered. However, we left the machine on, and everything sewed fine. Absolutely no problems, so we decided to send the control board back. This morning, the city came to replace the electric transformer to our place, and the power was off longer than the power supply would keep it going. When we cut the machine back on, it has not come on in the last 5 hours. Lights on the control board come on, and there is a humming, but it will not actually start with the green light coming onto the control panel and the machine's going through its first movements. Any suggestions? I really don't want to buy a control board if there is anyway I can avoid it. *************** =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================