Hello,
John has just posted in the Machines & Hardware forum of AmayaUsers Discussion
Boards under the title of color mismatch between Designshop and Bravo
machine--help.
This thread is located at
http://www.amayausers.com/discussion/showthread.php/6893-color-mismatch-between-Designshop-and-Bravo-machine-help
Here is the message that has just been posted:
***************
---Quote (Originally by VAOutpost)---
When I digitize my design in design shop all the colors look correct and the
stitches are all allocated to the correct colors. When I upload the design onto
my Bravo machine for embroidering the colors are not changing correctly and my
design is not loading the color changes correctly. I have tried troubleshooting
and putting in color changes and trims between my color changes in design shop.
the only work around is to manually change a color to the correct needle on my
Bravo machine as the design is being created on the machine. that is a REAL
Pain. Anyone have a similar experience and a solution?
---End Quote---
Not sure I understand.
We load a design from design shop to AOS. Once in AOS, we assign the colors to
the needles we want them to sew from.
Are you saying the design loads as ONE color and you have to then manually
switch as its sewing?
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================