Hello,
Mary Bowser has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of X-carriage won't center.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6440-X-carriage-won-t-center
Here is the message that has just been posted:
***************
I have a "red" Amaya, running OS V9. I stopped the machine midway through a
50,000 stitch design and turned it off. We had bad weather coming in and
ultimately lost power. When power resumed I turned everything back on and found
that it did not pick up where I left off, which wasn't the biggest problem. The
biggest problem is that the s-carriage is not centered. The design is centered
on the screen but when I do a trace it is completely off-center. I have
repeatedly turned the machine off and OS off, resaved and then reloaded the
design; centered from the software and also the control pad and nothing seems
to work. I am afraid to sew anything on the chance that it hits the hoop or the
arms. Any ideas? Hopefully you can tell from the picture that the arms are
about 2" off center.
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
