[amayausers.com] Re: Machine physically not centering
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 14 May 2009 14:32:18 UT
This message was posted by Hugo Torbidoni on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/690.html#000001
Steve
It sounds like your optical sensor for the X carriage may have grease or lint
on it. Have you recently performed maint on it?
Move the carriage to the right and wipe the sensor clean. Its located under the
Y Beam assy.
Call me if you have any questions.
Hugo Torbidoni
MelcoTech
301-471-3157
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
