[amayausers] Re: Lock/Trim ?
- From: "HK Acree" <hkacree@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Fri, 16 Dec 2005 13:03:40 -0800
Russell
Depends on whether you have converted your alphabets. There are lock stitches
digitized in all the Melco alphabets. If you have not converted (removed) these
you will not have any problems.
Herb
Royal Embroidery
----- Original Message -----
From: Russell Silva
To: Amayausers
Sent: Friday, December 16, 2005 12:16 PM
Subject: [amayausers] Lock/Trim ?
Hi all,
I did some lettering using the Garamond font from DesignShop and under
lock/Trim properties the lock setting was on none, am I going to have a problem
with stitches coming out, if so what can I do about it before I give it to my
customer? I usually have that setting to always by default but somehow it got
changed back.
Thanks in advance
Russell Silva
R. S. Embroidery
508-222-4433
Other related posts:
