Karen, I have the matl thickness on auto and I think the min is set at 2 (didn't think about that....I will up that) and yes I did adjust the height of the presser foot. ________________________________ From: Jstgrma <jstgrma@xxxxxxx> To: amayausers@xxxxxxxxxxxxx Sent: Friday, June 15, 2012 7:17 AM Subject: [amayausers.com] Re: Help with TaeKwonDo belt What is your minimum material thickness and did your adjust the height of the presser foot? Karen Embroidery Plus -----Original Message----- From: theboards <theboards@xxxxxxxxxxxxxx> To: amayausers <amayausers@xxxxxxxxxxxxx> Sent: Thu, Jun 14, 2012 9:55 pm Subject: [amayausers.com] Re: Help with TaeKwonDo belt This message was posted by drose700 on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1613.html#000001 Can anyone help me? =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com/ Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================