[amayausers] Re: Fastframes, and bobbin cover ?
- From: DLCompton@xxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 24 May 2006 13:10:29 EDT
I don't know about that one. I've never even tried (nor obviously have
needed to). Jeff? Rod?
Dorothy
In a message dated 5/23/2006 10:13:44 PM Pacific Daylight Time,
irisembroidery@xxxxxxxxxxxxx writes:
How about the one which slides in the cap frame? Did you know if I can
remove that? The screws seem to be different.
Best Regards,
Veena Viswanath
Iris Embroidery
www.IrisEmbroidery.com
(510)-226-6171
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of DLCompton@xxxxxxx
Sent: Tuesday, May 23, 2006 9:30 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Fastframes, and bobbin cover ?
I've had to remove the bottom of the bobbin case for an apron pocket order
(and tote pocket order) without any problem. I was really careful in putting
everything back together.
Dorothy Compton
Bee Embroidered
_www.BeeEmbroidered.com_ (http://www.beeembroidered.com/)
(916) 635-7467
Rancho Cordova, CA
In a message dated 5/23/2006 6:40:07 PM Pacific Daylight Time,
irisembroidery@xxxxxxxxxxxxx writes:
Hello all,
I recently got fast frames since I wanted to do some embroidery on a
glove. I just hooked it up and wanted to know it it was possible to remove
the bottom part of the bobbin case and an other piece on the bottom of the
bobbin case (something used to hook up the hat driver?) If I removed
either
or both of them, would there be any problem with my machine afterwards?
Thanks for the information
Best Regards,
Veena Viswanath
Iris Embroidery
www.IrisEmbroidery.com
(510)-226-6171
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
