This message was posted by Shuffletown Embroidery on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/776.html#000006 Hi all, I like to see how problems were resolved, so I thought I would post what I finally did with this. First of all, thanks for all the suggestions. As much as I liked the pins idea, I decided that it wouldn't work as well for clothing and I really needed a generally applicable solution. Solution: I wrapped the four straight edges of the outside hoop ring with @1" strips of muslin, taping it with masking tape at the beginning and the end and trying to keep the thickness uniform. I used muslin instead of stabilizer because mine are silicone treated. I thought they might be too slick and the tape might not stick (poet). I was able to go back to the lighter weight (more appropriate) stabilizer, increase the stitch density (but not as much as original), and go back to acti-feed. I did adjust my bobbin tension, which was a tad bit too tight. Sorry for the long-winded post. I hope this helps someone else. Mary =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================