This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1304.html#000002 Cindy, The lower rod ( the smaller rod of the two ) seems to be a weak point in the cap driver support area. I have seen many of these that have broken because of fatigue from vibration. The rod is held in place by a roll pin. The pin must be tapped out with a punch of some kind (drift punch tool) a new rod put in and the roll pin replaced. Rod Springer Amaya Tech & Trainer =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================