[amayausers] Re: Cap Centering
- From: "HK Acree" <hkacree@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 6 Apr 2006 12:09:51 -0700
Anand,
Try using the hoop button (square one, third down from the top, right side)
and the arrow buttons at the same time.
Herb
----- Original Message -----
From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, April 06, 2006 11:04 AM
Subject: [amayausers] Re: Cap Centering
>I pressed the target button and left right button and the up down button it
> does not budge what am I doing wrong?
>
> Thanks
>
> Anand
>
>
>
>
> A little different take on cap centering. I load design in OS then center
> hoop and design. Then I use the Hoop/Left or Right buttons to get the
> center
> set. Now, depending on how far up or down I want the design I use the
> Hoop/up or down and set that. Pretty straight forward so far. Assuming
> (yea,
> right) you are consistent in your hooping the up and down location does
> not
> change enough to be noticeable so I do not concern myself with it again.
> Sew
> the first cap, pop another on the machine, set the center with the
> Hoop/Left
> or Right and push the magic green button. BOOM, done in a flash and mak'in
> money.
>
> Herb
> Royal Embroidery
>
>
>
Other related posts:
