[amayausers.com] Re: Bridal Tote Bag Design
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 28 Dec 2009 18:17:53 UT
This message was posted by Game Day Designs on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1123.html
Hello all. I ordered in some tote bags to embroider 'Bride' and 'Team Bride'
on. (this is a personal project for a friend) The problem I have run into is
the 22" hoop doesn't give me a big enough design and the totes are to small for
the jacket back hoop. I have thought about just heat pressing them instead :(
. I don't really want to have to tear the side seam out and then have someone
re-sew them for me to embroider them. I do not have slim line clamps so that's
not an option. Anyone have any suggestions for me? Rhinestoned heat transfers
are too expensive for this project but I love the look of those. Please offer
any insight you might have. Thanks so much.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
