This message was posted by ckramer on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1475.html It seems as though the tension in my bobbins don't hold for very long. I purchased new ones awhile ago thinking that would help. I can partially unwind the bobbin if it's an overfilled one, I use the nebs which are suppose to help keep tension. What is constantly causing these to change. I sometimes have to adjust it several times during one average sized design. Yes, I've used paper to clean under the spring, readjusted, checked doing the bob and drop. Could my machine settings be so far off that the tension is being pulled loose by the actual sewing itself??? Does it on auto and on standard feed. I'm so tired of constantly messing with this. Sew outs look horrible if you have thread breads or bobbin breaks constantly. Please, any ideas are welcomed! =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================