[amayausers] Re: Beginning problems
- From: "Edna Khalifeh" <ednakhalifeh@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Sun, 15 Oct 2006 15:33:03 -0500
Just wondering, have you centered the hoop on the machine itself? I now do
this before loading a design and again after selecting a new hoop in the OS.
Edna Khalifeh
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Griffin William
Sent: Sunday, October 15, 2006 3:27 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Beginning problems
Thanks, Russell.
I now understand the second one. -- That is, the old design stays on
screen until another is loaded.
However, the first one does not work. I have gone back, centered the
design, chosen the 8.19 circular hoop, saved it as a new design. But
when I load it in the machine, it comes up with the large rectangle
hoop, and it is positioned way to the left of center--so far to the left
of center that when I trace it on the 8.19 circular hoop, it is
basically outside the hoop.
Any further suggestions?
Bill
=20
William A. Griffin
Roanoke Bible College
Elizabeth City, N. C 27909
252.334.2001
252.335.2321 -home
www.roanokebible.edu
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Russell Silva
Sent: Sunday, October 15, 2006 3:57 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Beginning problems
Hi Bill,
Problem a) Make sure you center the design in DesignShop before you save
it,=20
it is the button with the circle and 4 arrows pointing inwards.
Problem b) Use the reset design button then you will be able to load
another=20
design.
if you hover the pointer over the buttons in the OS and DesignShop it
will=20
tell you what they are.
Russell Silva
R. S. Embroidery
Amaya Technition
Attleboro, Ma
508-222-4433
----- Original Message -----=20
From: "Griffin William" <wag@xxxxxxxxxxxxxxxx>
To: <Amayausers@xxxxxxxxxxxxx>
Sent: Sunday, October 15, 2006 3:31 PM
Subject: [amayausers] Beginning problems
>I am a newbie.
>
> Just bought a used machine but bought the upgrades for the software.
>
> I seem to be doing well in DesignShop.
>
> However, I am having trouble in the OS/and the machine.
>
> Two problems:
> a) When I load a design to be stitched out, it loads the design
> all of the way on the left and thus hits the hoops, thus will not
> stitch. (I cannot center it.)
> b) I can not delete the sent design from the work load. When I
hit
> the "x" at the right corner (the means of closing a design), it
> registers at the bottom that this is to close and give option for
> saving, but nothing happens. It stays there. I can only close out the
> whole program (OS). But, when I reopen, that same design comes up
> again-still off center.
>
> Does anyone have suggestions?
>
> Bill
>
> William A. Griffin
> Roanoke Bible College
> Elizabeth City, N. C 27909
> 252.334.2001
> 252.335.2321 -home
> www.roanokebible.edu
>
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D
>=20
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=20
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
