[amayausers] Re: Back of Stretch Fit Caps
- From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Sun, 16 Apr 2006 14:01:38 +1000
Its OK I fixed the problem. I wathced the machine while it was sewing. I
removed the little metal piece below the peak clip. It was preventing the
cap from fitting flush against the hoop.
Anand
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Kesavan
Sent: Sunday, 16 April 2006 12:22 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Back of Stretch Fit Caps
Just started using my AMAYA on caps. On the the hoops works. The on the
other one the cap works its way loose. The strap is tight when it is hooped
but it just seems to come loose half way through
Anand
to all,
What is the best way to hoop the back of a "stretch fit" ball
cap.? I seem to be having some difficulty using the 4 in square or
4" round I usually use on the backs of caps.
I can't seem to get it evenly stretched for stitching.
thanks in advance.
bob
island embroidery
Other related posts:
