[amayausers] Re: Visors on XT driver

  • From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Sun, 16 Apr 2006 12:48:20 +1000

Where is the XT Extended?

Thanks




OK, sewing hats with the WACF hoop selected on the XT machine will give 
you burned bills....
The 'XT Extended WACF' hoop selection is not loaded on the drop down 
menu.  Once added to the hoop menu and selected the design cannot go as 
low as the WACF hoop and no more hats rubbing.  I knew it was me....

Mike

Mike Garber wrote:

>Morning,
>
>Has anyone sewn a sportsman visor on the XT cap driver.  I loaded one up 
>an was able to sew closer to the brim which was exciting.  The problem 
>is the visor rubbed on the back of the needle bar and burned a big hole 
>in it.
>
>The other thing I'm struggling with is unstructured hats are very loose 
>and wrinkled on the machine.  I think its the low needle plate.  On the 
>old machine I was able to get away with one piece of 4" tearaway on just 
>a front design.  The hat on the new machine has alot of loose material 
>in front of the needle.
>
>Anyone?
>
>Mike
>
>
>
>
>
>  
>




Other related posts: