Russell, Make sure you have the box checked to select both machines, this way when you alter one machine both will be adjusted. If this box is not checked, select 1st head, make the adjustment, then the 2nd and make the adjustment. Trust this helps. David Anderson Keband Australasia Pty. Ltd. 18 Daphne Cres, Hurstbridge. Vic. 3099 Australia Email: info@xxxxxxxxxx -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Russell Silva Sent: Tuesday, 25 April 2006 1:25 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Amaya OS ? Yes I did, it is only happening on one of my two machines. Russell ----- Original Message ----- From: "Kesavan" <kesavan@xxxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Monday, April 24, 2006 9:09 PM Subject: [amayausers] Re: Amaya OS ? > Did you click the Apply Buttton right at the bottom > > Anand > > -----Original Message----- > From: amayausers-bounce@xxxxxxxxxxxxx > [mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Russell Silva > Sent: Tuesday, 25 April 2006 12:33 AM > To: amayausers@xxxxxxxxxxxxx > Subject: [amayausers] Amaya OS ? > > > Hi All, > I sent my rotary hook to uncoated in the OS, when I shut the OS and > machines down and start them back up the hook setting goes to coated, any > suggestions on how to keep it on uncoated? > > Thanks in advance > Russell Silva > R.S. Embroidery > 508-222-4433 > >