[amayausers.com] Re: AMAYA XT Bobbin case area making LOUD noise
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 22 Nov 2009 02:35:33 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/827.html#000003
Both the selector and the knife individually?
If so, get out the little flat guage for checking the gap between retaining
support finger and the rotary hook body.
Information on this can be found in the Parts & Tech CD under Hook Timing.
If this spacing is not correct and/or the hook timing is not correct, the
needle could be contacting metal or the thread may be popping on the support
finger. Follow the instructions in the CD on the hook timing procedure
carefully......
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
