[access-uk] Re: nokia E7 on screen key pad help needed.
- From: "Mike Cassidy" <mike.cassidy@xxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sat, 5 Nov 2011 16:10:50 -0000
Hi Terry,
Yes indeed; a good option since I believe Talks makes life a little
difficult using touchscreen.
Cheers,
Mike
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Terry
Sent: 05 November 2011 09:18
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: nokia E7 on screen key pad help needed.
Hi
does this phone have a built in keyboard then, I assumed it was a touch
screen from what he had written. I'll google it and have a look.
Terry
_____
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Mike Cassidy
Sent: 04 November 2011 22:31
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: nokia E7 on screen key pad help needed.
Hi,
This sounds horribly obvious for the E7, but can you use the hardware
keyboard? As for the iPhone, no idea.
Cheers,
Mike
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Terry
Sent: 04 November 2011 19:15
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] nokia E7 on screen key pad help needed.
Hi all
A very good friend of mine works as a volunteer for the RNIB, and has come
across a issue with a particular problem, which he is struggling to help the
talks user with. I'll paste his comments below, and if anyone can help, it
would be very very much appreciated. It hopefully may also help others on
the list.
When he emailed this earlier, it made me smile, because I also have the same
problem on my iphone, so if anyone also knows the answer to the same
difficulty, but using an iphone instead, then this would be of great benefit
to me.
"I'm trying to help a chap at the moment with a Nokia E7 and Talks software.
He's having a problem where he can make a call OK, but when he has called
somewhere with a navigation system that needs digits pressed i.e. 1 for this
department, 2 for that department etc. he can't find the keypad on the
screen to send digits. I've got the manual for the software, but haven't
found anything about this, it certainly isn't in the section on making a
call. Any ideas"?
Thanks as always.
Terry
Other related posts:
