Hi Pele Your problem with regard to missing the end of programmes that DigiTV records is simple to cure. Once again the answer is in the settings menu, so open the file menu cursor down a couple of times to settings and press enter. Cursor left twice to get into the main settings tree and cursor down until you reach recordings, right cursor until you hear “general one of two”. Cursor down once to reach the “recordings” branch and right cursor to open it. Now tab twice to get to the first of two timer boxes it will probably say “ one, one of twenty”. This setting determines the number of minutes DigiTV starts recording before the programme is scheduled to start. I have this set to zero. Then tab once again and you will hear a similar “one, one of twenty”. This is the number of minutes DigiTV records after the programme is scheduled to finish. I have mine set to 5. Now tab right round to the O>.K. button and press the spacebar and you will now have set different values in minutes that DigiTV will record before and after the scheduled length of the recording. Alternatively, there is a different method of achieving this on a programme to programme basis. You can do this when you set up the recording in the first place, by tabbing to the programme length of recording, and increasing this to the length you want. It can easily be increased by five minutes by pressing the cursor up key five times. HTH Steve Green