[access-uk] Re: USB 02
- From: "Ali" <alpot@xxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 20 Oct 2006 05:45:21 +0100
Thanks Stephen,
I think the hub has problem. It needs to go back. Thanks for the
suggestion though.
Thank you.
--------------------
Ali
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Stephen Green
Sent: 20 October 2006 03:06
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: USB 02
Hi Ali
I'm sorry to come in halfway through this discussion, but I wonder if the
problem may be that the external power supply is not connected properly to
your hub.
If you use a USB 2.0 hub with a USB 1.1 device connected to any of its
ports, but the hub is unpowered, I believe that the hub converrts itself to
USB 1.1.
I'm only suggesting this as I had a similar problem some time ago with an
unpowered hub.
Regards
Steve Green
----- Original Message -----
From: "Ali" <alpot@xxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Thursday, October 19, 2006 10:39 PM
Subject: [access-uk] Re: USB 02
No, it is USB 2
Thank you.
--------------------
Ali
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Mike Cassidy
Sent: 19 October 2006 21:34
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: USB 02
Hi,
Is the PC USB 1; mine is, and I get the same message when I connect my Ipod
via my hub.
Hth,
Mike
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Ali
Sent: 18 October 2006 21:27
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: USB 02
George,
No, when I connect them, the notice says, this device can perform faster if
it is connected to a high speed USB.. Click here for available ports.
Thank you.
--------------------
Ali
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
George Bell
Sent: 18 October 2006 21:01
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: USB 02
Could it in fact be the scanner and hard drive that are USB 1?
George.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx
[mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Ali
Sent: 18 October 2006 20:55
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] USB 02
Hi,
I just bought a seven port USB 02 hub, which is externally powered. It is
one of those Belkin hubs. All USB ports on my computer are USB 02. When I
connected this hub on my computer, it did not complain, but, when the
scanner or the external hard drive is connected, it says, this thing will
work faster if it is connected to USB 02. I am sure the hub is USB 02.
Anyone any idea how I can get this rectified please? I am using Windows XP
Home service pack 2.
Thank you.
--------------------
Ali
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1808 (20061017) Information __________
This message was checked by NOD32 antivirus system. http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1816 (20061019) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
__________ NOD32 1.1817 (20061019) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
