why would it record the plus 1 version of a series like soaps? isn't that silly behaviour really given that if you set a sopa on ITV1 why would you need it again pon plus 1? sure good explanation :) just curious On 7 May 2012, at 12:02, john coley wrote: > Hi everybody, today I want to tell you about the recording facilities of the > TVonics box. There are two types of recording, instant record, whereby you > just press the record button, third button right hand side of the remote, > followed when prompted by ok, the other timer recording, which can either be > done by setting a timer manually, whereby you enter the start and end times, > or, which is far easier, using the guide. > When you find a programme in the guide you want to record just press record, > and it will be scheduled for recording. If the programme is one of a series > you'll be asked if you want to record all the programmes in the series, and > if so to press the blue button, bottom row right hand side of the remote, and > it'll schedule recording for all episodes of that programme it finds. If it's > just a one off programme you'll just be prompted to press ok. > One thing to note about series recording. Where, for instance, a programme is > repeated on the corresponding plus one channel it will record those too. > John. > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq