[access-uk] Re: TVOnics and Digital Switch-Over

  • From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Thu, 20 Sep 2012 12:04:42 +0100

Hi Pele,

Then I don't know to be honest, but you could try what John Land suggested.

All the best

Steve

--
Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
Tel: +44(0)1438-742286
Mob: +44(0)7956-334938
Fax: +44(0)1438-759589
Email: steve@xxxxxxxxxxxxxx
Web: http://www.comproom.co.uk


-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Pele West
Sent: 20 September 2012 11:13
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: TVOnics and Digital Switch-Over

Hi Steve

Thanks for writing.

The TVOnics and the television are connected via a SCART lead, which appears
to be ok.

The aerial is connected via a booster. This is plugged into an aerial point
on the wall. From the booster a cable goes into the TVOnics and another
cable goes 
out to the television. I don't think this is faulty otherwise the television
would not get a proper signal, and it seems to be ok.

Pele





** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq



** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: