Re getting Eloquence to use a different soundcard this might help http://www.freedomscientific.com/fs_support/BulletinView.cfm?QC=432 -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Dj Paddy Sent: 03 September 2005 17:46 To: access uk Subject: [access-uk] Soundcard A Soundcaard B, how to choose Hi guys. I've a bit of a shambles set up here when it comes to soundcards. I've a low budget SB Live and a High-End Turtle Beach Catalina both in an XP Home box. Now to give a bit of backround. I bought the TBC from the states and a friend sent it out to me. However the mic/line in port is not working! And hasnt' doen since I got it, months back. And he procrastanated majorly on when he took delivery and when he sent it out so I couldn't even return it let alone do anything else with it. So I've a TBC that I cant' record on but has excellent audio out, and a soundblaster I can record on but has awful audio out and I cant' use elaquince through because it's tied to the turtle beach. Two questions. 1. Without installing/uninstalling cards can I direct elaquince in jaws to use soundcard or or soundcard b as I wish? Say select soundcard b, reboot and load jaws and it will run with soundcard b and do the opposite to get it back to soundcard a? 2. I've some videos i want to record the audio from quite urgently so I'm going to be out of pocket regardless of how long I wait. So a new soundcard is called for. I was really really really really tryign to stay away from creative but there's very little on the market at that price range of no more than £100 and not a 20 quid jobby, and I refuse to use onboard sound as the microphone port I find isn't good quality at all even on my little swanky gigabit board. So it maybe the audidgy I'm going for. Any experiences? Good bad points, things to look out for, other cards to look at? Thank you! Barry The pillars of any good relationship I believe are, Honesty, Trust, and Communication. ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq