Hi Pele Yes I was messing around with it a while back and found that I could hear the tv quite clearly from another room, trouble is I couldn't work out how to stop it recording. Ok thanks, will sort it later. Have to find which card I put the recording on. Regards Adrien -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Pele West Sent: 25 August 2012 10:43 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Problems with plextalk pocket and voice recordings Hi Adrien To navigate to your recordings: 1. Press the Title key 2. Press the Up Arrow key to "Select Category" 3. Press Left or Right Arrow to "Recordings" 4. Press Down Arrow to find the list of recordings 5. When you find the one you don't want press the Menu key 6. Press Left or Right Arrow to "Delete Title" and press the Enter key. You will then be asked if you really want to delete the selected title so press Enter to confirm. To make a new recording: 1. Press the Record key. Do not hold it down or a Voice Memo will be created 2. Press Right Arrow until it says "Auto" or "New Title". 3. It is then recording. Press the Record key again to pause or the Enter key to stop. Play around with this for a bit as, if yours is like mine, it is a little too clever for its own good. Pele ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq