I had a similar problem with my Pioneer 108 and ended up replacing it with a new machine. I have had no problems since so it' must have been the Pioneer was clapped out as the engineer said. Roger Some mistakes are too much fun to only make once. ----- Original Message ----- From: "TrueBlue & Proud" <billy72@xxxxxxxxxxxxxxxx> To: "Access-UK" <access-uk@xxxxxxxxxxxxx> Sent: Tuesday, April 17, 2007 8:34 AM Subject: [access-uk] CD-Rom Problem? > hi guys, > having the following problem with my Pioneer DVD-RW DVR 108 Rom Drive. > Just recently I have been unable to burn disks, using any versions of Nero > burning rom. > I have also tried using the xp burning function as well, but nothing > doing. > The drive is reading disks all right. > The funny thing about it all is, sometimes during the burn cycle, it will > get to the 100 percent done, and then an error message: the burn cycle > could > not be completed. > > At other times, it will complete the burn cycle, but when you try playing > the disk in question, nothing happens. > > And when you check the disk, funny enough, there is nothing on the disk. > Very frustrating, > > Any Ideas, > One for George me thinks, > Billy > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq