[access-uk] Re: Barclays Pinsentry again - Eurika!
- From: "John Wilson" <j.wilson07@xxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 5 Dec 2008 16:03:36 -0000
Hello Terry,
Yes, that's more or less what I've been doing. In reality, I
don't think that it has, for the most part, a timing-out
problem at all, other than, perhaps, for the first few
times, when you're just feeling your way through the system.
I've just ahd some success, so perhaps things will be OK for
the most part in future.
John.
----- Original Message -----
From: "Terry Clasper" <terry.clasper@xxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Friday, December 05, 2008 3:00 PM
Subject: [access-uk] Re: Barclays Pinsentry again - Eurika!
John.
If its any help at all what I do is:
Log onto the site and hit the log on link
Hit the next button to get to step two
Put the last four digits of the card in the first box then
tab to the box to enter the first four digits from the
card reader.
At that point i shove the card in, enter my pin number and
put the cardreader on the desk.
Then I hit enter on the card reader and interactively type
in the cardreader code.
This works for me, initially I did have problems becasue I
was taking too long to enter the code.
Probably less than useless but thaught I'd share my method
with you.
----- Original Message -----
From: "John Wilson" <j.wilson07@xxxxxxxxxxxxx>
To: "Access UK" <access-uk@xxxxxxxxxxxxx>
Sent: Friday, December 05, 2008 2:55 PM
Subject: [access-uk] Barclays Pinsentry again - Eurika!
Hello All,
I just thought I'd let you know that I've just had four
more tries at getting this Pinsentry system to work. The
first two were again abortive in the same way as
previously. However, I did get in on the third try and so
came out and tried again, with success this time as well.
So, perhaps it's going to behave itself reasonably, if
not perfectly, from now on.
John.
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click
on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following
link:-
**
[mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on
the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
--
No virus found in this incoming message.
Checked by AVG. Version: 7.5.552 / Virus Database:
270.9.13/1826 - Release Date: 03/12/2008 09:34
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
