[access-uk] Re: Barclays Pinsentry again - Eurika!
- From: "Terry Clasper" <terry.clasper@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Fri, 5 Dec 2008 15:00:37 -0000
John.
If its any help at all what I do is:
Log onto the site and hit the log on link
Hit the next button to get to step two
Put the last four digits of the card in the first box then tab to the box to
enter the first four digits from the card reader.
At that point i shove the card in, enter my pin number and put the
cardreader on the desk.
Then I hit enter on the card reader and interactively type in the cardreader
code.
This works for me, initially I did have problems becasue I was taking too
long to enter the code.
Probably less than useless but thaught I'd share my method with you.
----- Original Message -----
From: "John Wilson" <j.wilson07@xxxxxxxxxxxxx>
To: "Access UK" <access-uk@xxxxxxxxxxxxx>
Sent: Friday, December 05, 2008 2:55 PM
Subject: [access-uk] Barclays Pinsentry again - Eurika!
Hello All,
I just thought I'd let you know that I've just had four more tries at
getting this Pinsentry system to work. The first two were again abortive
in the same way as previously. However, I did get in on the third try and
so came out and tried again, with success this time as well.
So, perhaps it's going to behave itself reasonably, if not perfectly, from
now on.
John.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
