Ok, is there a way in Surface reader where you can save the current state of a project and return to it later should the app or the surface itself show strange behaviours? /Krister > 2 aug 2014 kl. 16:42 skrev Tim Burgess <tim@xxxxxxxxxxxxx>: > > Hi, > > I think I'd just go for it and take a backup of the file after you've > completed each block of buttons in case you get another crash. A power off/on > cycle of the unit should clear any changes of mode you may invoke. I'm > afraid, given the lack of documentation, this is going to be the only way to > progress and we're bound to hit some annoyances on the way. > > Best wishes. > Tim Burgess > > -----Original Message----- > From: visurfacereader-bounce@xxxxxxxxxxxxx > [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Krister Ekstrom > Sent: 30 July 2014 16:17 > To: visurfacereader@xxxxxxxxxxxxx > Subject: [visurfacereader] Re: Educating the surface reader about the > Digi003, questions before I start > > Hi, I’m talking about the lcd screen on the Digi003. I’m afraid that it > enters some mode or other where buttons may be relearned or such, I don’t > know, it’s just that last time I tried and came to those buttons, something I > don’t know what happened and I wasn’t able to generate any more midi messages > for Surface reader to learn and then the application crashed on me and > nothing was saved. > I know I have a tendency to give up things a little too easily which is why I > turn to you to ask what to do. > /Krister > >> 30 jul 2014 kl. 16:39 skrev Tim Burgess <tim@xxxxxxxxxxxxx>: >> >> Hi, >> >> When you say that the screen changes, are you talking about the LCD screen >> on the Digi003 itself, or the computer/PT screen? >> >> Best wishes. >> Tim Burgess >> >> -----Original Message----- >> From: visurfacereader-bounce@xxxxxxxxxxxxx >> [mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Krister Ekstrom >> Sent: 28 July 2014 12:58 >> To: visurfacereader@xxxxxxxxxxxxx >> Subject: [visurfacereader] Educating the surface reader about the Digi003, >> questions before i start >> >> Hi there. >> I will soon begin trying to teach the Surface reader the names of buttons >> and the like on the Digi003, however i have a question about things that can >> happen while trying to teach the Surface reader: There are a couple buttons >> such as ”Utility”, ”Midi map A and B” and the like that switch the screen >> into other modes while sending messages. What should i do with those because >> i don’t know how to switch back the surface to some kind of default mode >> again so that i can continue learning. How do you suggest we go about with >> that? >> /Krister >> >> >> >> > > > >