[THIN] Re: Profile

  • From: "Matthew Shrewsbury" <MShrewsbury@xxxxxxxxxxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Tue, 11 Oct 2005 15:53:59 -0400

I think that is correct.

 

Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+

Senior Network Administrator

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Bill Beckett
Sent: Tuesday, October 11, 2005 3:30 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Profile

 

Yes, that's more along the lines of what I thought. The newer profile
would be used. So what SHOULD be happening is that the profile on the
file server would be newer after being copied. Therefore, it should be
pulled in regardless of the existence of a cached profile. Or so I
thought. 

In theory anyway.



 

On 10/11/05, Greg Moseley <greg@xxxxxxxxxxxxxx> wrote: 

Only if the timestamp on the local cached profile is the same/newer:

 

This is an article from around the NT4 days, but I'm pretty sure it
remained the same for 2000. 

 

 

          Troubleshooting Roaming Profiles 
Of course, things can go wrong, and roaming users get upset, angry, or
confused when that occurs. This section covers some of the most common
problems with roaming profiles. Before examining specific problems,
however, it's a good idea to look at what the operating system does with
roaming profiles. 

There is a checklist the operating system follows in an effort to load
the appropriate profile and to save changes the roaming user might make
to the profile back to the roaming profile. Let's examine what happens
when everything goes smoothly before discussing the problems that can
occur. 

When a roaming user logs on, the system checks to see if the
server-based profile is available. If it is, the system checks the
date/time stamp of the hive file and then looks for a local profile for
this user. Depending on what is found, one of the following events
occurs: 

*         If a local profile is found and the date/time stamp of the
hive file is later than the date/time stamp on the server-based hive,
the local profile is loaded and placed in the cache. 

*         If a local profile is found and it is older than the
server-based profile, the server-based profile is loaded and cached. 

*         If no local profile is found, the server-based profile is
loaded and cached. 

When the user logs off, the profile that is in the cache is saved back
both to the server and to the local disk (a local profile is created if
none had been found during logon). As you can see, this pretty much
ensures that the most recent profile is saved on the server. The next
time this user logs on from any workstation, this new profile,
containing all the changes the user made, is loaded. 



Thanks


Greg 

 

________________________________

From: thin-bounce@xxxxxxxxxxxxx [mailto: thin-bounce@xxxxxxxxxxxxx
<mailto:thin-bounce@xxxxxxxxxxxxx> ] On Behalf Of Matthew Shrewsbury
Sent: 11 October 2005 20:11
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Profile 

 

My understanding is if there is a local copy Windows will always use
that. 

 

Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+

Senior Network Administrator

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Bill Beckett
Sent: Tuesday, October 11, 2005 3:06 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Profile

 

Right but what if you want to keep the copy of the profile there? Does
the TS server still pull from the file server and use that profile or
does it see the cached copy locally and use it? 


 

On 10/11/05, Matthew Shrewsbury < MShrewsbury@xxxxxxxxxxxxxxx
<mailto:MShrewsbury@xxxxxxxxxxxxxxx> > wrote: 

There is a GPO settings to delete profile on logoff. 

 

Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+ 

Senior Network Administrator 

-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Bill Beckett
Sent: Tuesday, October 11, 2005 2:54 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Profile

 

Can someone just yes or no this for me?
 

Roaming profiles used on a file server. TS profile pointing to this
location. Terminal Server is W2K and is keeping a cached copy of the
profile. 

 

Does the server always use the cached copy? I thought that the roaming
profile was pulled in, copied locally and then upon logoff, copied back
out to the TS profile location. This doesn't seem to be the case. 

 

 

 

Other related posts: