[THIN] Re: Object Picker
- From: "Lucas Boyken" <lboyken@xxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 5 Jun 2003 16:17:26 -0500
When I was working on a military installation, we were using a single
user domain with five other resource domains. Each resource domain
trusted the user domain via a one way trust. We occasionally had
problems between domains, in which we re-setup the trust between the
domains. This, of course, was without running any sort of TS or Citrix.
However, we were running loads of other apps, to include SMS. Don't
know if this helps or hurts...but what the heck...just more info.
Lucas W. Boyken
Computer Systems Associates
Account Manager / Technical Representative
lboyken@xxxxxxxxx
Company Phone: 800.222.7601
Office Phone: 515.332.2751
Fax: 515.332.5687
-----Original Message-----
From: Magnus [mailto:magnus@xxxxxxxx]=20
Sent: Thursday, June 05, 2003 3:29 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Object Picker
I have run into this issue before between a Win2k (No Sp's) with MF 1.8
=3D in and NT 4 domain with a 1 way trust to another NT 4 domain we had =
to
run nltest.exe with the sc (secure channel) switch and reset the secure
=3D channel between the domain controllers. It was a big pain in the =
butt.
Once it =3D was done you would be good for about 3 weeks or so and then
have to run it again. Once we upgrade to AD Domain the problem
disappeared
Magnus
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On =
=3D
Behalf Of Nick
Sent: Wednesday, June 04, 2003 11:06 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Object Picker
Hi All!
I have faced recently with such problem.
I have two domains: one - WinNT4.0 SP6, the second - Win2k SP3. =3D
One-way trust relationship is established between them, namely: Win2k
domain =3D trusts WinNT domain. Naturally, for Win2k domain, it looks =
like
trust =3D relationship with other forest. Except for that, the "domain
admins" group from WinNT domain is included in "Administrators" local
group in Win2k domain.
A problem is in the following: an error occurs when attempting to =
=3D
set permissions to any resource in Win2k domain by means of network =3D
connection with it from WinNT domain: "Unable to open Object Picker,
because the =3D place where it could be found is absent". Thus it is
possible to modify permissions of a resource, but it is impossible to
add new members and =3D give them an access.
Articles 284914, 263231, 292575 from Microsoft didn't give answer =
=3D
to the question because I don't have such conditions in which error =3D
described in these articles occurs.
In Win2k domain all works fine and without any problems.
Maybe anyone faced with such problem and can tell how to solve it ?
Any opinions and ideas are welcome!
-------------
Best regards, Nick mailto:nick@xxxxxxxxxxx
********************************************************
This Week's Sponsor - Appsense Technologies
New! AppSense Optimizer is a new product from AppSense=3D20 designed to
increase the user capacity of your servers.=3D20 =
http://www.appsense.com/
**********************************************************
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - Appsense Technologies
New! AppSense Optimizer is a new product from AppSense=20
designed to increase the user capacity of your servers.=20
http://www.appsense.com/
**********************************************************
Useful Thin Client Computing Links are available at:
http://thethin.net/links.cfm
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - Appsense Technologies
New! AppSense Optimizer is a new product from AppSense
designed to increase the user capacity of your servers.
http://www.appsense.com/
**********************************************************
Useful Thin Client Computing Links are available at:
http://thethin.net/links.cfm
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
Other related posts:
