[THIN] Re: Certificates

From: "Rick Mack" <Rick.Mack@xxxxxxxxxxxxxx>
To: <thin@xxxxxxxxxxxxx>
Date: Mon, 3 Oct 2005 19:33:00 +1000
Tom,
 
Just checked your site. The certificate still has the old issue date so it 
hasn't been replaced.
 
Do you have a csg server in front of the nfuse/WI server or is it the same 
machine. Whichever server is the front end needs it's certificate updated. If 
CSG is being used, then use the Secure gateway configuration utility to select 
the new certificate.
 
regards,
 
Rick
 
Ulrich Mack 
Volante Systems 
Level 2, 30 Little Cribb Street 
Coronation Drive Office Park 
Milton Qld 4064 
tel: +61 7 32431847 
fax: +61 7 32431992 
rick.mack@xxxxxxxxxxxxxx 

________________________________

From: thin-bounce@xxxxxxxxxxxxx on behalf of Tom Flanagan
Sent: Mon 3/10/2005 5:41 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Certificates


Thanks Rick/Mark
 
I have followed your instructions but the expiry date on the new certificate is 
the same as the old one. Any ideas what this might be.
 
Tom

        -----Original Message-----
        From: Rick Mack [mailto:Rick.Mack@xxxxxxxxxxxxxx] 
        Sent: Monday, 3 October 2005 15:09
        To: thin@xxxxxxxxxxxxx
        Subject: [THIN] Re: Certificates
        
        
        Hi Tom,
         
        Didn't look far enough. Looks like the operational FQDN for you WI site 
is https://nfuse.doric.au.com.
         
        Please change all instances of "csg" to "nfuse" in the instructions I 
sent you.
         
        If you guys aren't using CSG, which may not be a good idea, then you'll 
have to assign a new certificate in IIS rather than reconfigure CSG.
         
        regards,
         
        Rick

        Ulrich Mack
        Volante Systems
        Level 2, 30 Little Cribb Street
        Coronation Drive Office Park
        Milton Qld 4064 
        tel: +61 7 32431847
        fax: +61 7 32431992
        rmack@xxxxxxxxxxxxxx <mailto:rmack@xxxxxxxxxxxxxx> 

                -----Original Message-----
                From: thin-bounce@xxxxxxxxxxxxx 
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Tom Flanagan
                Sent: Monday, 3 October 2005 4:00 PM
                To: thin@xxxxxxxxxxxxx
                Subject: [THIN] Certificates
                
                
                Hi
                 
                How do I create a new certificate for users to access my WI 
3.0. The current certificate expires next month. 

________________________________

        This e-mail, including all attachments, may be confidential or 
privileged.  Confidentiality or privilege is not waived or lost because this 
e-mail has been sent to you in error.  If you are not the intended recipient 
any use, disclosure or copying of this e-mail is prohibited.  If you have 
received it in error please notify the sender immediately by reply e-mail and 
destroy all copies of this e-mail and any attachments.  All liability for 
direct and indirect loss arising from this e-mail and any attachments is hereby 
disclaimed to the extent permitted by law.
________________________________



#####################################################################################
This e-mail, including all attachments, may be confidential or privileged.  
Confidentiality or privilege is not waived or lost because this e-mail has been 
sent to you in error.  If you are not the intended recipient any use, 
disclosure or copying of this e-mail is prohibited.  If you have received it in 
error please notify the sender immediately by reply e-mail and destroy all 
copies of this e-mail and any attachments.  All liability for direct and 
indirect loss arising from this e-mail and any attachments is hereby disclaimed 
to the extent permitted by law.
#####################################################################################
[THIN] Re: Certificates

Other related posts:
