Does the SMPS start? See these tips! --------------------------------------------------------------- Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- MITSUBISHI VZ3 Dead, Seems To Go Into Shutdown. Robinson Electronics Check Or Resolder All Connections On The Yoke Plug "Not The Chassis" Seems To Be Loose Connections On Yoke - Common Problem. --------------------------------------------------------------- MITSUBISHI VZ3 Dead, Power Up. Relay Click Only. Robinson Electronics Replace (Open) 4a. Fuse - "130v. Line F902". Replace (Shorted) H.Output Transistor Q5a02 - D2349 Mfr# 260p797020. Replace (Bad) 3 Mh Choke Coil - L5a01 Mfr# 351p138010. Vz3 Chassis. --------------------------------------------------------------- MITSUBISHI VZ3 Dead, Clicks On And Back Off, F902 Open Marshfield Tv F902 (4 A Fuse) Hard To See Or Get To, Located In Front Of Main Smps Xfrm, Underneath Standup Board. Also Found Shorted Output, Q5a00, 2sd2349 And Had Bad Flyback, 334p246060, Crc Had It For $90 (Nov `03), Phone 1-909-629-5641. Per Other Tips, Be Sure To Check Regulator Str-M6811, Common To Fail When Output Shorts, This Set Didn't Need It. --------------------------------------------------------------- MITSUBISHI VZ3 Dead - Relay Clicks Twice Orlan Stone, Cet Replace Ic900 (Str-M6811), Ic901 (Se130n) And Pc900 (On3161r). Note: Light Box Pulls For Shop Service. See Vz3 --------------------------------------------------------------- MITSUBISHI VZ3 Dead - Customer Complained Of Intermittent Operation Before John Kincaid Sos TV Strm6811 Power Supply Chip $28 --------------------------------------------------------------- MITSUBISHI VZ3 Dead , Rly Clicks Twice, No Hv Slidewire Electronics Resolder L913 Off Pin 4 Of T900 In Ps. Vz3 Chassis --------------------------------------------------------------- ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ======================== ----- Original Message ----- From: "pete" <tvtech@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, October 16, 2005 2:55 PM Subject: [TechAssist] vs4543 mitsubishi relay clicks then clicks off no high voltage > mitsubishi projection checked fluid leaks found none. checked all pico > fuses ok checked hot transistor and high voltage transistor are all ok > checked diodes from secondary ok do not have a print can anybody help me. > any help will be greatly appreciated > Pete > > Perdomo Tv Inc Since 1972 > Miami.Fl > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/