Per RCA replace C14802 on all pincushion problems part# 240934 Phillip R Hull phil245@xxxxxxxxxxxxx ----- Original Message ----- From: "mark brock" <brock@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, May 07, 2002 5:01 PM Subject: [TechAssist] rca ctc203CA5 model F32649 > > RCA F32649 chassis ctc203CA5 > > came in dead, replaced h.o.t and cr4101, came on with severe pincushion, > found resistor r14810, burnt C14805 bulged and Q14802 shorted on pin amp > daughter board, replaced all and still have bad pin coushion, not sure of > value of the resistor colors looked like black black gold gold, didn't > compute in my head so I put in a .1 fusible. still looks the same as if I > would not have done the pin amp repair ? Is there a parameter to adjust ? > is the value of R14810 actually zero ? can anyone elighten me here ? > thanks for all the input. > brock > Brock Electronics > R.R.4 box 237 > Independence Ks. 67301 > 316-331-0235 > fax 331-7191 > brock@xxxxxxx > mailto:brock@xxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/