At Tuesday, 7 May 2002, you wrote: >Per RCA replace C14802 on all pincushion problems part# 240934 >Phillip R Hull >phil245@xxxxxxxxxxxxx >----- Original Message ----- >From: "mark brock" <brock@xxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Tuesday, May 07, 2002 5:01 PM >Subject: [TechAssist] rca ctc203CA5 model F32649 > >>r 14810 is 1.0 ohm tino >> RCA F32649 chassis ctc203CA5 >> >> came in dead, replaced h.o.t and cr4101, came on with severe >pincushion, >> found resistor r14810, burnt C14805 bulged and Q14802 shorted on pin >amp >> daughter board, replaced all and still have bad pin coushion, not sure >of >> value of the resistor colors looked like black black gold gold, didn't >> compute in my head so I put in a .1 fusible. still looks the same as if >I >> would not have done the pin amp repair ? Is there a parameter to adjust >? >> is the value of R14810 actually zero ? can anyone elighten me here ? >> thanks for all the input. >> brock >> Brock Electronics >> R.R.4 box 237 >> Independence Ks. 67301 >> 316-331-0235 >> fax 331-7191 >> brock@xxxxxxx >> mailto:brock@xxxxxxx >> >> >> ------------------------------------------ >> To REMOVE your email address, click here: >> http://www.tech-assist.org/unsubb.html >> ------------------------------------------ >> ***NEW*** Tips Added Instantly!!!*** >> Submit Repair Tips here: >> http://www.tech-assist.org/secure/tip/ >> > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/