Hugh, First of all, R3485 is off the flyback and the tip you refer to states to replace it with a jumper wire. However, I belive you will find that the problem is most likely an open 10 ohm resistor (ref# 3340) on the CRT board. Most of the time the resistor is open because it was underrated (they used a 1/3 watt resistor). Install a 10 ohm, 1/2 watt resistor to replace it. Bob Waterman, CET® Service Manager Gemini Computer, TV, & Security Alarm Systems, Inc (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx maintv wrote: > > Set comes on -very bright screen w/retrace-then shuts off. Tip says to > change R3485 4.7 ohm, I can not find it on the board! > Need to know where it is, Magnavox has not called me back so I can > order the manual on Force32. > Set is 27F800 chassis. > thanks > Hugh > Main TV > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ -- ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/