[TechAssist] Re: projo
- From: "Clancy Harms" <dickstv1@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 24 Nov 2001 09:21:00 -0800
Raul
Give me the "PTV" number and the board number (APW / APD ???)
And I'll see what I can come up with. Do you have the WINStips, or
ESD technical tips programs?
Clancy Harms NESDA's Region 7 Director
Dick's Radio & TV, Inc.
2319 West Clay St. If it's broken...a real man can
St. Charles, MO. 63301 can break it even better !
(636)-724-5055
(636)-724-5531 fax
email: dickstv1@xxxxxxxxxxxxx
mailto:dickstv1@xxxxxxxxxxxxx
----- Original Message -----
From: "rcjv" <rcjv@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, November 24, 2001 10:16 AM
Subject: [TechAssist] Re: projo
>
> clancy
> ive seen the leakage problem and the cracked crt when it leaks onto the bd
> but this one is different. i put the q802 and the blue is fine i let it
play
> for an hour and its fine. the we deliver it back to the cust and it wks
fine
> for 3 or 4 days. i dont see any leakage or arching . do you have a
phillips
> tech website that i can go to to check for this
>
> tia
>
> Raul
> ----- Original Message -----
> From: "Clancy Harms" <dickstv1@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Saturday, November 24, 2001 8:43 AM
> Subject: [TechAssist] Re: projo
>
>
> >
> > That's right!
> > I forgot about the leakage "inside" of the CRT.
> > And to think...I just had one last month...DUH!
> > It was a shot in the dark. But the blue CRT was the only
> > one that we could see any type of leakage. We just used a clip
> > to clip lead from the dag to the bare pins of the tube.
> > Sent it PATX in Texas for remanufacturing.
> > And it cost me a WHOPPING.... $88.50
> > PATX is fantastic! If you need info on them, let me know.
> >
> > Clancy Harms NESDA's Region 7 Director
> > Dick's Radio & TV, Inc.
> > 2319 West Clay St. If it's broken...a real man can
> > St. Charles, MO. 63301 can break it even better !
> > (636)-724-5055
> > (636)-724-5531 fax
> > email: dickstv1@xxxxxxxxxxxxx
> > mailto:dickstv1@xxxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Don Hartigan" <hartstv@xxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Saturday, November 24, 2001 4:42 AM
> > Subject: [TechAssist] Re: projo
> >
> >
> > >
> > > Shine a light down the ''Blue crt''.It probably has a hair line
> crack.Most
> > > times it's the Blue but of course check the others as well.Another
quick
> > > ''field check''is to remove the socket from each crt & hold it close
to
> > the
> > > pins of the suspect tube,if it draws an ''ARC'',your tube is
bad,drawing
> > > excessive current,hence blowing your HOT.....hth..regards...Don of
> > > HARTS-TVCR
> > > ----- Original Message -----
> > > From: "RCJV" <rcjv@xxxxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Saturday, November 24, 2001 2:23 AM
> > > Subject: [TechAssist] projo
> > >
> > >
> > > > hi guys i have a 9p6034c103 ptv philips chassis projo takes
out
> > > q802 i have replaced the whole powerdef pcb and it takes q802 again.
> what
> > > can i look for is there a fix for this after replacing q802 it wks
fine
> > for
> > > 3 or 4 days and goes out again
> > > >
> > > >
> > > >
> > > > tia
> > > >
> > > > Raul
> > > >
> > > > =================================
> > > > Help make your TechAssist database better!
> > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > > =================================
> > > > To UNSUBSCRIBE your email address, click here:
> > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > >
> > >
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> >
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
>
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
