I got a personalized tour through PATx's plant in Mexico a couple of weeks ago. Extremely impressed with their operation and quality control. Their operation can sustain 300 tubes a day. Plant is in production only 8.5 hours a day. Very clean. Dennis Viereck Clancy Harms wrote: > That's right! > I forgot about the leakage "inside" of the CRT. > And to think...I just had one last month...DUH! > It was a shot in the dark. But the blue CRT was the only > one that we could see any type of leakage. We just used a clip > to clip lead from the dag to the bare pins of the tube. > Sent it PATX in Texas for remanufacturing. > And it cost me a WHOPPING.... $88.50 > PATX is fantastic! If you need info on them, let me know. > > Clancy Harms NESDA's Region 7 Director > Dick's Radio & TV, Inc. > 2319 West Clay St. If it's broken...a real man can > St. Charles, MO. 63301 can break it even better ! > (636)-724-5055 > (636)-724-5531 fax > email: dickstv1@xxxxxxxxxxxxx > mailto:dickstv1@xxxxxxxxxxxxx > ----- Original Message ----- > From: "Don Hartigan" <hartstv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, November 24, 2001 4:42 AM > Subject: [TechAssist] Re: projo > > > > > Shine a light down the ''Blue crt''.It probably has a hair line crack.Most > > times it's the Blue but of course check the others as well.Another quick > > ''field check''is to remove the socket from each crt & hold it close to > the > > pins of the suspect tube,if it draws an ''ARC'',your tube is bad,drawing > > excessive current,hence blowing your HOT.....hth..regards...Don of > > HARTS-TVCR > > ----- Original Message ----- > > From: "RCJV" <rcjv@xxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Saturday, November 24, 2001 2:23 AM > > Subject: [TechAssist] projo > > > > > > > hi guys i have a 9p6034c103 ptv philips chassis projo takes out > > q802 i have replaced the whole powerdef pcb and it takes q802 again. what > > can i look for is there a fix for this after replacing q802 it wks fine > for > > 3 or 4 days and goes out again > > > > > > > > > > > > tia > > > > > > Raul > > > > > > ================================= > > > Help make your TechAssist database better! > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > > ================================= > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe