Avery, Please include the model number in the subject line..in case others wish to look in the archives... From Tech Repair CD: Hitachi\43UWX10B\Intermittent convergences then stayed out. Magic focus did nothing\+5V to DCU. Found bad solder joint jumper PDK3 pin3 11V's going to 5V Reg. convergences still out. All other voltages to DCU ok\Changed both STK392-110\DP14G\Found bad solder joint jumper PDK3 pin3 11V's going to 5V Reg\After restoring +5V to DCU two of the DCU parameters were wrong. Reset parameters. Reset convergence. Reset Magic Focus parameters and Initialized Magic Focus\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, August 27, 2004 12:46 PM Subject: [TechAssist] hitachi projo converg. I went to the home to ck out a model 43uwx10b chassis dp14g for bad converge. Changed the stk392-110s and four resisters out on the converge panel. It came on withworse converge then before and after 10 minutes or so the IC's got real hot and the set shut down. Changed the ICs again same thing. Anyone have any idea what's going on. Help would be thankful for. Avery. Avery Boyd 4666B S. Mingo Tulsa OK 74146 Phone 918-665-2400 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/