Change these & see if she fires.... C914 (470 Uf 50v), C916 (10 Uf 100v), C940 (100 Uf 16v) Jeff Stielau Shoreline Electronics Repair 125 Beech Tree Lane Westbrook, CT 06498 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ----- Original Message ----- From: "repair1" <repair1@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, May 14, 2002 6:40 PM Subject: [TechAssist] ck3526r dead degauss relay clicks > > Mitsubishi ck3526r, set is dead, push power, degaussing relay energizes > nothing else, this set appears to have two smps, on one board on side of > cabinet,one on def board, if I jump other relay(set has 2 relays) hv comes > up, no audio, no raster, I can hear smps on right board chirp when you apply > ac, but reg(ic9a1) has no output, just raw b+ on pin3 and a -6v on pin1, > if any one has print for this set, since there is no sams, or any > suggestions, I would greatly appreciate it . > charles betzler > Best Electronics > repair1@xxxxxxxxxxxxx > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/