Joe, love "The Speaker", how much is it to be a "web Member"? Country TV Ron Miller Inez, TX. 77968 ----- Original Message ----- From: <JSopko112@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, August 24, 2004 6:15 PM Subject: [TechAssist] Re: accessing service menu on sanyo m# DS35590 > In a message dated 8/24/2004 4:36:21 PM Eastern Daylight Time, > webstertv@xxxxxxxx writes:> Techs, > > Second request. Does anyone know the procedure for accessing the service > > menu on this Sanyo 35" TV. It has too much green in picture, need to make a > > gray scale adjustment. Any help would be appreciated! > > TIA > > Dan Webster > > > > DEAR DAN... NesdaOhio has been collecting these procedures a while, and > keeping them in the "member's only" Pages of our website... i've copied what > we've got on the Sanyo's for you below (not much) , but i urge you to go to > www.nesda-ohio.com and sign up as a "web Member" so you can access these > resources for yourself the next time you need them. If you come across any that we > don;t have, please send it to us and we'll include it for others to use. > > > Joe Sopko > Consumer Service > "SERVICE SINCE THE LAST MILLENIUM" > 4028 Mayfield Rd > S.Euclid,Oh 44121 > 216-381-1140 > (fax)208-330-9603 > Provided by NESDA of Ohio http://www.nesda-ohio.com > Sanyo-Fisher, ( some Sears ) > > Demo > > Sanyo TV's Different Methods for Different Models > > Method 1. Press and hold Menu button for 5 seconds to deactivate. > Method 2. Press and hold Channel up and down on the set for short time. > Method 3. Press and hold Setup Key for several seconds. > Method 4. Press and hold ( < ) Adj. Key for several seconds. > > Fisher TV's > Press and hold either "Level Key" on the remote for several seconds. > Or, Hold adjust(or control) left or right button down for 3 seconds > > > > Child Lock Feature > > VCR's > Display says "Blocked". With original remote, Press Prog,3,3,Prog > > > Service Menu > > TV's > Unplug the set. While pressing Menu Key, plug set back in. > Volume adjusts Values, Channel changes the Menu > To Exit service mode, press Menu Key > > #7 is Vert Size > #8,9,10 are RGB > > Color Setup > Set #8,9,10 (Biases) to 0 > Set #11,12 (Drives) to 40 > Go to Parameter 25. #1 and 3 to set red drive. #7 and 9 to set blue drive. > Go to Parameter 26. #1 and 3 to set red bias. #4 and 6 to set green bias. #7 > and 9 to set blue bias. > > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/