[TechAssist] Re: Zenith SS6515G, Intermittent Sound
- From: Ralph Dorsey <Merlin-Wizard@xxxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 31 Oct 2001 06:18:04 -0600
i might be wacky but make sure there's not a speaker switch on the back
of the set. I've had these not in the correct position and also have had
to spray them with contact cleaner also...look for the easy problem first
gulftech@xxxxxxxx wrote:
>Friends,
>
>This set has intermittent sound. It's driving me crazy. Once it comes
>on, will be fine until turned off for awhile. May come back fine, may be
>no audio for several minutes, may no audio for hours.
>
>This is all I know. The audio pcb is fine. When I have no audio, there
>is no audio going into the module. With no print, I don't know where it
>is lost. Thought it was the rear-panel switch that selects AUX
>STEREO/TV, but that idea did not pan out. Am pulling my hair out on this
>one, but I have little left!
>
>I know I am giving little information, but it's all I have. Unit came in
>dead. I repaired the p/s and all seemed fine. The customer came to pick
>it up and asked to see it working. It came on with no sound. He said,
>"Oh, yes, before it died it had no sound." (Nice to tell me then!)
>While we were talking, the sound came on. This has haunted me for three
>weeks.
>
>A schematic or even a block diagram would be most helpful.
>
>All suggestions welcome.
>
>Thanks,
>
>
>Ken Smith
>Gulf Technical Services
>3034 Gulf Breeze Parkway
>Gulf Breeze, FL 32561
>850-934-8324 (Voice) 850-932-0819 (Fax)
>
>________________________________________________________________
>GET INTERNET ACCESS FROM JUNO!
>Juno offers FREE or PREMIUM Internet access for less!
>Join Juno today! For your FREE software, visit:
>http://dl.www.juno.com/get/web/.
>Help make your TechAssist online repair tips
>database better! Submit your fixes here:
>http://www.circuitwork.com/techassist/tip/#tips
>To unsubscribe write to:
>techassist-request@xxxxxxxxxxxxx
>with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
