I have a IQC50H94W in for repair and RK62 is a 1.8 ohm/ 1 watt. May be the same but not sure. Dave Huston TV & Electronics 2846 Marion-Cardington Rd.E. Marion, Ohio 43302 email: HustonTV@xxxxxxxxxxxx ----- Original Message ----- From: "armando guerra" <birdie@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 16, 1980 3:42 PM Subject: [TechAssist] Zenith Projo Model IQC60H94\Need part ID. This set came in with real bad convergence.I am going to replace the 2 stk-392-110. RK62 in that ckt is completely burned and cannot id it.Can someone please give me the value of that resistor.I want to say a 1.5 ohm but don't like to guess.There is also a pico fuse (yellow) but it checks ok.The other resistors are testing ok also.If there is other parts that a common failure on this convergence ckt,can you please let me so that I can check that out.Thanks. Mando AZ ---------------------------------------------------------------------------- - This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/