[TechAssist] Zenith Projo Model IQC60H94\Need part ID.
- From: armando guerra <birdie@xxxxxxxxxxxxx>
- To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Wed, 16 Jan 1980 13:42:14 -0700
This set came in with real bad convergence.I am going to replace the 2
stk-392-110. RK62 in that ckt is completely burned and cannot id it.Can
someone please give me the value of that resistor.I want to say a 1.5
ohm but don't like to guess.There is also a pico fuse (yellow) but it
checks ok.The other resistors are testing ok also.If there is other
parts that a common failure on this convergence ckt,can you please let
me so that I can check that out.Thanks.
Mando
AZ
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
