I made a mistake reading the model number when I posted this yesterday. The model number is TXM2796HFX/XAA and a chassis K55A made in 2002.The vertical is compressed vertically in the middle but picture still extends from top to bottom. The sides are also bowed in slightly. The B+ to the horiz is +135 (it is labeled +130). I have ESR'd most all electrolytics in the set and found none bad. I soldered some connects but they did not look bad. I reset the eepromm using menu-1-8-2-power but no change. I am not sure if that is the correct procedure without the manual. If anyone has a manual or any suggestions, please let me know. John. John Mielke Main TV 636 Main St Longmont, Co 80501 303 776 6955 303 776 0792 fax www.longmontmaintv.com maintv2004@xxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/