Tried that ,gray scale is on the green side mot much but I notice it. Ron Miller D.T.V. Texas ----- Original Message ----- From: "Ray Lufkin" <Rlufkin@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 30, 2001 5:33 PM Subject: [TechAssist] Re: Zenith C3S chassis SJ2775BG SM question > > I may be off base here but can you adjust akb by turning the g2 pot on the > fly all the way off and bringing the g2 pot up very very slowly. Put up > bars, brightness at 50% contrast at 75% color at 50% and bring up g2 pot > till you just distinguish the 1st and 2nd box on bottom right. > > > > > ----- Original Message ----- > From: "Dave Routson" <davestv@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, November 30, 2001 2:13 PM > Subject: [TechAssist] Re: Zenith C3S chassis SJ2775BG SM question > > > > > > HI Ron, > > The schematic says and I quote, > > "This set employs an Auto Kine Bias circuit. > > There is no adjustment to be performed." It does have a service > > menu but that feature is no in it. > > However to get into it you simultaneously press the front panel > > menu, volume down, and channel down > > buttons. It doesn't say how to exit but > > probably just power off will do it. > > It only shows six adjustments to > > be made in the service menu -- > > Factory mode > > Environment > > Brightness > > Maximum Volume > > Vertical Sync > > AC Power > > Hope this helps some. > > Dave Routson > > ----- Original Message ----- > > From: "Ron Miller" <rlmbkm@xxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Friday, November 30, 2001 10:56 AM > > Subject: [TechAssist] Zenith C3S chassis SJ2775BG SM question > > > > > > > > > > Need to adj. gray scale,no pots on crt pcb don't see a AKB ic.Using the > > code > > > of holding menu till disappears hitting 9876 then enter did not take me > to > > > service menu.How do I adj. this one? > > > Ron Miller > > > D.T.V. Texas > > > > > > > > > ================================= > > > Help make your TechAssist database better! > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > > ================================= > > > To UNSUBSCRIBE your email address, click here: > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > > > > ================================= > > Help make your TechAssist database better! > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > > ================================= > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe