[TechAssist] Re: Zenith A60M91W1 Problems
- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 20 Aug 2004 12:16:38 -0500
Shaun ck for the 110k resistor under a 3watt resistor in front of thehot. I
can't think of the resistor # now. Avery.
Avery Boyd
4666B S. Mingo
Tulsa OK 74146
Phone 918-665-2400
----- Original Message -----
From: "Shaun" <satguy@xxxxxxxxxxxxx>
To: "tech" <techassist@xxxxxxxxxxxxx>
Sent: Friday, August 20, 2004 11:27 AM
Subject: [TechAssist] Zenith A60M91W1 Problems
This 60 inch Zenith tv was dead. I installed a kit from Tritronics to repair
the 9-1978-1 module. When I reinstalled the board the set does turn on now
but the convergence is not working at all and the picture that does come up
goes brighter and darker in a pulsing way. Does anyone have any tips on this
problem? I checked the convergence module all the resistors are good. The
set is 40 miles away from the shop and I do not know if the +16 and -16 are
there but I would like to try and find any other problems on the 9-1978-1
first. I also found RX3206 and R3252 open near the flyback.
Shaun
Advanced Electronics
224 West Riverview Ave.
Fort Morgan, CO 80701
----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
